The MTC Viper Pro riflescopes are made with the patented adjustment graduation system, with turrets containing a special micro gearbox with 3:1 ratio. Due to this, three turns of the upper part of a turret simultaneously make the lower identification part, which displays the information required (eg. miliradians,MOA, or yards), turn once. The complete turret adjustment instructions can be found here.
Should you be interested in MTC Viper Pro riflescope with standard tactical turrets without the transmission, you can see MTC Viper Pro Tactical 5-30x50.
All Viper Pro line riflescopes have one-piece tube made of hardened Duralumin with 30 mm in diameter, sharp vision, clearly visible SCB2 cross, sixfold magnification ( 3-18x and 5-30x)and lens with 50 mm in diameter. This excludes the Viper Pro 10x44 model.
The riflescope cross is the new improved SCB2 placed in the second focal plane (in front of the eyepiece), which means the apparent reticle distance stays constant with magnification change. The SCB2 reticle is similar in principle to the Mil-Dot reticle, the difference being that the SCB2 uses dots for segmenting the cross, with the main segments being divided in half with smaller dots. The SCB2 reticle is very well-made: it is sufficiently thin, yet not to the point of vanishing. The cross has two backlight colours, green and red. The backlight colour and intensity option is placed in the single button placed at the side of parallax regulation. The parallax is adjustable within range from 10 yards (9.144m) up to infinity.
All the riflescope lenses have a multi-coated anti-reflective layer. The riflescope is filled with nitrogen to prevent lens haze, it is frost-proof, waterproof and contains lens and eyepiece covers.
The MTC Viper Pro riflescopes are not made in collaboration with Optisan. MTC riflescopes – designed by shooters for shooters! We are the direct importers of MTC riflescopes and we guarantee their warranty and post-warranty service.
EUR
Čeština
