Quest V60 professional metal detector equipped with a 28 x 26 cm Blizzard 11 coil, which allows easy localization of deeply hidden objects and is resistant to mineralization. The built-in wireless module and the Quest Wirefree Vibe earphones make it easy to use. The detector is equipped with a four-part telescopic seatpost made of carbon fibers. The seat post can be shortened to a length of 49 cm, which greatly facilitates transport and storage. The fully waterproof construction allows the detector to be submerged to a depth of up to 5 meters. In addition, the built-in gyroscopic sensor enables automatic tuning to the ground.
The Quest V60 detector has a 400x240 px LCD display that is backlit in several steps depending on the degree of sunlight. Thanks to the viewing angle of up to 60 degrees and the fast response of the display, it ensures that the user does not miss any information.
The V60 works at five frequencies (5, 10, 15, 20, 40 KHz) or HyperQ mode. Thanks to HyperQ technology, the device simultaneously transmits multiple frequencies deep into the ground, which makes it possible to focus on much smaller objects even in difficult conditions. It allows you to locate such artifacts as coins, buttons, jewelry or even gold nuggets.
The detector is equipped with a Li-Po battery with a capacity of 5600 mAh, which is charged using a USB type C cable. The device can last up to 15 hours on a single charge. To save energy, the coil can be set to go into sleep mode after 5 seconds of no movement. The Quest V60 detector is equipped with four programs: park, field, salt water, gold. The detector is also equipped with functions such as: aiming, discrimination/carving, object identification, iron polarization, speed, volume control, vibration.
The package contains:
detector Quest V60,
Blizzard 11 coil,
Quest Wireless Headphones Wirefree Vibe,
USB Type C cable
Features of the Quest V60 detector:
Frequency: 5, 10, 15, 20, 40 kHz, HyperQ
Number of search modes: 4
Coil: Blizzard 11
Waterproof: up to 5 m
Headphone jack: USB Type-C
Power supply: Li-Po battery 5600 mAh
Duration per charge: 10 to 15 h
Battery status indicator: yes (4-modular)
Ground tuning: manual, automatic
Sensitivity setting: yes (range 0 to 99)
Measurement function: yes
Discrimination of unwanted objects: yes
Cutout filter: yes
Identification of objects using sounds: yes (2, 3, 5 tones)
Object identification indicator: yes (from 0 to 99)
Volume control: yes
Display illumination: yes
Threshold (leading signal): yes
Weight: 1300 g
EUR
Čeština
