Hill Spartan MK2 Air Pump with Filter

The second generation of the top pump of the English manufacturer Hill for wind turbines. This is the best quality pump on the market, which is meant to compete with pumps from Chinese manufacturers. If you have had a bad experience, for example, with pumps from Turkish or Chinese manufacturers, then there is no risk with this manufacturer. The pump is not equipped with a pressure indicator. From the outside, it's still the familiar Hill pump, but the inside has been completely redesigned. The Hill Spartan Windshield Pump requires approximately 20% less pumping power than the previous generation MK1.

The Hill Spartan MK2 pump can reach pressures up to 300 bar/4500 psi. The Hill Spartan MK2 pumps are still manufactured entirely in England and the quality of the workmanship shows. We also sell the pump in a set with a filter or it can be additionally equipped with a dehumidifying filter in the future. We also supply all spare parts, a small gasket kit, a large gasket kit and even a replacement air filter cartridge for Hill pumps.

The pump tip is suitable for all PCP models of Air Arms, BSA, Hatsan (AT 44) Airforce (GunPower), CZ, Weihrauch. Filling with pressure indicator and simple exhaust. It is mounted on a G5/8 valve, which is standard on all modern diving cylinders. For filling air guns equipped with a "quick coupling" (Crosman, Daystate) it is necessary to use this end. The Hill pump is also suitable for filling all windbreakers with a 1/8" thread.

A classic symptom of high-pressure seal damage is piston stroke resistance. To extend the life of the seal, we recommend using only high-quality silicone petroleum jelly for lubrication and pumping slowly with 15-minute breaks after every 40 pumps. We are direct importers of the Hill brand and also provide warranty and post-warranty service for Hill pressure pumps.