Developed from the Bantam model, the tactical Brocock XR Sniper HR Magnum HiLite Laminate air rifle differs from it mainly by the use of side lever action for reloading.
The laminated Brocock XR rifle with Kevlar cartridge and a laminate bullpup type stock has all the benefits from the mutual cooperation of Daystate and Brocock producers. Brocock XR Sniper HR Magnum has an improved patented “Slingshot Hammer” system, ensuring a better air dosage and lower consumption. This system, along with the Dutch Huma-produced pressure regulator, improves the shot consistency, thus putting this air rifle far ahead of its competitors in terms of accuracy.
The Lothar Walther barrel is 600 mm long. It is a “shrouded” type barrel, meaning the barrel itself is covered with an outer layer, serving as a sound moderator. The barrel is finished with ½ UNF male thread, allowing for further moderator mounting.
The trigger is adjustable, with safety placed at the front. The rifle can be reloaded using the side lever action. We see this as the better solution than with the previous Brocock Bantam model version, where reloading was done with the straight-pull bolt action. The mounting rail for riflescope or collimator sight is 11mm long; the weaver mounting rail is placed at the front part of the stock under the cartridge. The rifle is equipped with two manometers, one showing the pressure in the cartridge, the other showing the pressure of the regulator. The adjustable cheek piece made from pleasant and warm material, along with the adjustable butt plate, shall conform to any shooter.
The low weight (only 3,3 kg) and compact size (102 cm) of the rifle are ensured by the Kevlar cartridge and the synthetic bullpup type stock. Thanks to the Huma regulator, the precise air dosage ensured by the “Slingshot Hammer” system , and the choice Lothar Walther barrel, the air rifle is perfectly accurate and without par in its price range .
|XR Sniper HR Magnum HiLite laminate
|páčkou - Side Lever Action
|16, 30, 40, 75 J
|Maximum filling pressure