Hill MK5 PCP pump

The latest generation (fifth generation, MK5) of the top pump from the English manufacturer Hill for windsurfers. This is the highest quality pump on the market. If you have had a bad experience, for example, with pumps from Turkish or Chinese manufacturers, then there is no risk with this manufacturer. The pump is equipped with a pressure indicator and a tube with a 1/8" end. From the outside, it is still the familiar Hill pump, but the inside has been completely redesigned. The Hill MK5 Windshield Pump requires approximately 20% less pumping force than the previous generation MK4.

The Hill MK4 pump can reach pressures up to 300 bar/4500 psi. Hill MK5 pumps are still manufactured entirely in England and the quality of the workmanship shows. We also sell the pump in a set with a filter or it can be additionally equipped with a dehumidifying filter in the future. We also supply all spare parts, a small gasket kit, a large gasket kit and even a replacement air filter cartridge for Hill pumps.

The pump tip is suitable for all PCP models of Air Arms, BSA, Hatsan (AT 44) Airforce (GunPower), CZ, Weihrauch. Filling with pressure indicator and simple exhaust. It is mounted on a G5/8 valve, which is standard on all modern diving cylinders. To fill air rifles equipped with a "quick coupling" (Crosman, Daystate) it is necessary to use this quick coupling. The Hill pump is also suitable for filling all windbreakers with a 1/8" thread.

A classic symptom of high-pressure seal damage is piston stroke resistance. To extend the life of the seal, we recommend using only high-quality silicone petroleum jelly for lubrication and pumping slowly with 15-minute breaks after every 40 pumps. We are direct importers of the Hill brand and also provide warranty and post-warranty service for Hill pressure pumps.